Development Background
When multiple measuring instruments are used, it is complicated to manage the sensor head and processor unit. We developed this product in response to such customer requests.
Based on the most requested specifications of measuring range and working distance, the processor is integrated and the measuring speed is high. We have developed a compact size that can be incorporated into equipment.
Features
1. Sensor and processor, integrated
2. Compact, can be incorporated into equipment and jigs
3. High-speed measurement (1.6K data/s)
Product Information
| Item | Integrated tilt sensor (Small Type) |
| Model | ST-3100 |
| Measurement sample | Optical plane（reflectance 80% more） |
| Working distance | 0～200mm |
| Measurement area | +/-54min*1 |
| Repeatability*2 | 0.025min |
| Linearity*3 | +/-0.15% of F.S. |
| Source | 660+/-10nm |
| Beam diameter | φ1mm*4 |
| Output rate | 1,600 times/sec |
| Size（Without protrusions） | W65 D75 H34mm |
*1. Circular range.
*2. Range of variation (6σ) of the average of 16 measurements of our standard sample under static conditions.
*3. The error against the ideal straight line when measuring our standard sample at 140 mm W.D. is shown. It may vary depending on the object to be measured.
*4. Diameter (1/e² width) just after sensor injection.
Product Documentation
Related Solutions
Non-contact posture monitoring of pickups with vacuum nozzles
Non-contact measurement of dallision(roll-off) at the periphery of semiconductor wafers
Non-contact measurement of semiconductor wafer shape(warpage) after cutting and polishing
Non-contact measurement of semiconductor wafer tilt and blur during spin-coating
Non-contact angle confirmation of ellipsometer measuring object
Two autocollimators are used to measure the parallelism of the measured object
Two autocollimators are used to measure the squareness of the measured object
Galvano motor measurement for laser engraving machines, etc.
Laser welding machine, optical axis adjustment of processing machine configuration optics
Posture monitoring of optical components that make up laser welding and processing machines
Optical axis adjustment of the optical components that make up the projector
Parallel adjustment of test chart and mount
Confirmation of parallelism of upper and lower surfaces of flexible board crimping machine
Positioning of the components that make up the optical pickup
Parallel adjustment and angle monitoring of X-ray mirrors
Optical axis adjustment of mirror mount stages used in optical experiments
Inspection of shaft inclination in gearbox
Motor shaft collapse inspection
Monitoring of wear and tear deterioration of the picking section of the robot
