World’s First! Information on laser autocollimator attachable to C-mount

Thank you for your continued patronage of Katsura Opto Systems.

We are pleased to announce the world’s first autocollimator that can be attached to a C-mount. This product is a laser autocollimator in which the measurement laser is emitted perpendicularly from the center position to the flange surface of the C-mount.

This product can be mounted in place of a CMOS camera to enable axis alignment and alignment adjustment of equipment optics, jigs, etc., with respect to the camera.

It can be attached to a measurement lens to check the alignment between the optical axis of the lens and the measurement surface.

Enables optical axis adjustment of inspection equipment and measurement equipment equipped with a camera, as well as alignment with the surface on which the object to be measured is installed.

In addition, it is possible to check the alignment of the microscope objective lens flange reference plane,

The table on which the measurement object is placed can be aligned parallel to the flange reference plane of the objective lens of the microscope.

This is a simple product that can be used immediately without difficult operations or a dedicated person in charge. We are waiting for your request with a demo unit available for loan.

Please contact us from the inquiry form below to make a request. Our representative will contact you shortly.