Development Background
Is it possible to realize a compact autocollimator that can be easily integrated into equipment? We developed this product in response to such customer requests.
The sensor head is designed to be extremely small based on the specifications of measuring range and working distance, which are frequently requested.
We have developed an unprecedented lightweight and compact product that enables control of sensors via serial communication.
Features
1. World’s smallest class, lightweight and compact
2. High sensitivity (reflectance 0.5% or more measurement possible)
3. Easy measurement with included software (For Windows)
Product Information
| Item | Ultra-compact tilt sensor | ||
| Model | TM-2070 | TM-2090 | |
| Measurement sample | Optical plane（reflectance 0.5% more） | ||
| Working distance Measurement area |
– | 0～85mm+/-90min*1 | |
| 0～110mm +/-70min*1 | 0～110mm +/-70min*1 | ||
| 0～170mm +/-45min*1 | 0～170mm +/-45min*1 | ||
| 0～250mm +/-30min*1 | 0～250mm +/-30min*1 | ||
| Repeatability*2 | 1sec | 1.3sec | |
| Linearity*3 | +/-0.25% of F.S.（+/-0.35min equates） | +/-0.25% of F.S.（+/-0.45min equates） | |
| Source | 650±10nm | ||
| Beam diameter | φ1mm*4 | φ0.5mm*5 | φ1mm*4 |
| Output rate | 60 times/sec | ||
| Size（Without protrusions） | W38 D42 H18mm | ||
*1. Circular range.
*2. Our standard sample use and setting on WD50mm, 6σ when measured at rest. At camera brightness (PK) 180.
*3. The error against the ideal straight line when measuring our standard sample at 50 mm W.D. is shown. It may vary depending on the object to be measured.
*4. Diameter (1/e² width) just after sensor injection.
*5. Diameter (1/e² width) at 50 mm W.D. Model of sensor head is TM-2070-C001 (appearance is the same as TM-2070).
Product Documentation
Related Solutions
Non-contact posture monitoring of pickups with vacuum nozzles
Non-contact measurement of dallision(roll-off) at the periphery of semiconductor wafers
Non-contact measurement of semiconductor wafer shape(warpage) after cutting and polishing
Non-contact measurement of semiconductor wafer tilt and blur during spin-coating
Non-contact angle confirmation of ellipsometer measuring object
Optical axis adjustment of semiconductor wafer projection (exposure) lens block
Two autocollimators are used to measure the squareness of the measured object
Two autocollimators are used to measure the parallelism of the measured object
Laser welding machine, optical axis adjustment of processing machine configuration optics
Posture monitoring of optical components that make up laser welding and processing machines
Galvano motor measurement for laser engraving machines, etc.
Optical axis adjustment of the optical components that make up the projector
Parallel adjustment of test chart and mount
Angle measurement of image sensors in digital cameras
Confirmation of parallelism of upper and lower surfaces of flexible board crimping machine
Positioning of the components that make up the optical pickup
Parallel adjustment and angle monitoring of X-ray mirrors
Angle measurement during MEMS mirror tilt operation
Optical axis adjustment of mirror mount stages used in optical experiments
Angle measurement of microprisms smaller than 1 mm
Measurement of lens actuators in smartphone cameras
Non-contact tilt measurement of hard disk drive heads
Inspection of shaft inclination in gearbox
Motor shaft collapse inspection
Monitoring of wear and tear deterioration of the picking section of the robot
